Left Continue shopping
Your Order

You have no items in your cart

You might like
Product
€10,00
Add to cart
Free shipping on orders over
100 € EU / 170 US$ World
Kaliko is based in Berlin, Germany, but we ship worldwide. German version of the website coming soon.

Currency

Language

HOW TO DYE WITH PLANTS

How to dye with plants

 

Plant dyeing took the internet by storm a few years ago and there are now countless plant dyers sharing inspiration online. There is just one problem—it’s not always as easy and straightforward as it seems…


 
Basic recipe

When I first started my adventure with natural dyes in 2015 I fell into the same trap. It took me years to realize, that like any other craft, natural dyeing has to be practiced to be mastered. It’s not only that there’s so much misinformation and frankly fake tutorials to be found. Another problem, that I am guilty of myself, was misinterpreting the information found online and drawing the wrong conclusions. It took me years to realize that some of the beliefs about natural dyeing I had were just wrong.

But this beautiful craft keeps on giving. I am still dyeing passionately 7 years in and I keep learning new things all the time. This is a post where I share some of the most basic concepts in plant dyeing. Please take this blog post as a foundation that you can build upon, not as a final recipe and all there is to it. Let’s start!

Here’s your plant dye tutorial in 5 steps

SCOUR — MORDANT — RINSE — DYE — RINSE

…and now onto explaining what it all means ;)


Fibers you can dye

Plant dyes work on natural fibers. Natural fibers are fabrics and yarns made with natural materials, for example, wool, cotton, linen, silk, etc. Synthetic fibers, on the other hand, don’t take up natural dyes well or at all.

General rule: Only natural fibers can be dyed. Fibers coming from animals (silk, wool, etc) take up the colors better than the fibers coming from plants (cotton, linen, hemp).


Natural dyes you can use

The sky is the limit… well, almost. Not all dyes are equal. If you stick to traditional dyes used for centuries, you can’t really go wrong. How to find them? In old books. And by old books, I really mean old books. Surprisingly many (utterly beautiful!) new books share very questionable dye sources. It might be deceiving when you’re first starting out. So to start with, here’s a short list of a few traditional natural dyes:
weld, madder, indigo, woad, logwood, fustic, osage, oak galls

I personally like experimenting and testing new plants. I collect them in my local park (always research toxicity before!) and test their qualities. If it wasn’t used traditionally there’s a very good chance it’s not super lightfast, but it’s still lovely to collaborate with nature this way. Here’s a short list of some of the locally foraged (or collected in my kitchen) dyes I like using, even though they’re not all equally stable:
marigolds, goldenrod, black hollyhock, chamomile, acorns, walnuts, cow parsley, tansy, avocado stones, onion skins, and tea. Check out this blog post for color references.

Remember, that dye quality is a spectrum. Dyes can’t be divided into just two categories (good vs bad). Experimentation is the key to finding what you feel comfortable with. Yet there is a group of plants that show such poor lightfastness that I personally find dyeing with to be a waste of resources (unless it’s just for fun, to entertain yourself or your kids). Here’s a short list of the plants that fade faster than I find acceptable (no matter what you do): beetroot, berries, red cabbage, black beans, turmeric

General rule: things you can eat usually don’t dye well. Just eat them instead. For super stable colors turn to traditional literature (basic colors: yellow-weld, red-madder, blue-indigo).


Preparing the fibers

Before you apply the dye, you have to prepare the fibers. The process goes like that: scour (wash), mordant, rinse.

The first thing I always do is scour the fibers. There are natural substances, as well as additives from the milling process, that protect the fibers. But they also prevent the mordant and dye from bonding with the cloth/yarn. Each kind of fiber calls for a different recipe and I won’t list them all here. I recommend Boutroup&Ellis book for recipes. For example, for cotton, I throw it in my washing machine at 90 degrees Celsius with a spoon of baking soda. For wool, I cook it in a dye pot for an hour at 60 degrees Celsius with wool detergent (cool down slowly to prevent felting!).

The second step is mordanting. Mordant is always a metal salt. There are many metals you can use: aluminum, iron, copper, chrome, etc. I work with aluminum and iron. There are some alternatives to mordants like tannins or soy milk. These substances are not mordants, though. They might improve color uptake or lightfastness in some cases, but do not create a chemical bond between the fiber and the dye. The bond they create is mechanical, which means it might be broken by rubbing or washing.

There are different kinds of aluminum salts available, each one call for a different recipe and can be used on different fibers. (Boutroup&Ellis book again or my own eBook Mordants for natural dyes). I personally, use aluminum formate. It’s a great mordant, as it works on all kinds of natural fibers and is applied cold. You can buy it online, but as far as I know, it’s only available in Germany and Israel. Prepare the solution (100g al. formate for 5L water in a lidded bucket), throw the fibers in, and let them soak for ca. 24h. Take out, squeeze the excess back into the bucket and rinse the fibers. Remember to always use gloves when working with mordants. Wear a face mask, too, if you’re working with fine powders like aluminum acetate. Aluminum formate can be stored in a lidded bucket until it’s used up.

General rule: scour your fibers by cooking them for 1h (temperature and substances according to the fiber type) and then mordant the fibers with metal salt of your choice (for example 24h hours in a cold solution of aluminum formate). Always rinse thoroughly after mordanting. Wear gloves!


Extracting and applying the dye

In order to extract the dye from plants, you have to dissolve the dye in water. There are different temperatures and extraction times for different plants and it’s difficult to give a one-recipe-fits-all. Experimentation is, again, the key. For harder dyestuff, like acorn, I cook them at 100 degrees Celcius for at least a few hours and let them cool down overnight. For soft flowers, like marigolds, I keep the temperature under a simmer for a maximum of one hour. Try things out, make notes, and, eventually, you’ll develop a special kind of sensitivity.

After the dye is extracted, I strain the dye bath through a piece of muslin cloth to get rid of all plant matter. Next, I put the mordanted (!) and wetted fibers into the dye. When you put your fibers in the ready dye bath, heat it up once more and let it simmer for at least an hour. Stir the fibers every 10-15 minutes to avoid splotches. You can even cool down the fibers in the pot overnight, though it might dye unevenly if not stirred regularly. Take out your fabric, rinse it thoroughly under cold water and let it dry.

General rule: cook the plant in the water to dissolve the dye (temperature and extraction time depends on the plant), strain the dye, place the fibers in the dye bath and cook again to let the dye bond with the mordant. Rinse.


Exceptions to the rule

At this point I’d like to give you one more tip on the way: there is no one right way to do it! It doesn’t mean there is no wrong way to do it, though. The process should always match the intention. What I mean by that is: you decide what your intention is, and adjust the process to your needs. I have a really good resource on my blog—Plant dyeing directory—a flowchart that helps you decide what process is right for you. The process described above is what serves me in my business and art practice. It is not necessarily what I would choose if I would be, for example, running plant dyeing classes with children.


Exercise

Now a small exercise for everybody who always wanted to try natural dyeing but never found the courage or time. It will only take an hour and it’s so easy!

  • Prepare three big glass jars and a small amount of natural white wool divided into 3 mini skeins (around 10g each).

  • Try to collect some red or yellow onion peels, three avocado stones, and some freshly ground coffee beans (alternative—black tea).

  • Cover onion peels with water in a small saucepan and bring it to a boil. Cook for an hour. Strain the skins and pour the liquid into a jar and let it cool down. Cut avocado stones into smaller pieces, cover with water in a small saucepan and let simmer until the stones are soft, usually around an hour or two. Dispose of the stones and cool down the liquid in the second jar. Brew fresh coffee using coffee filters to separate the grounds and pour the liquid into the third jar. Add enough cold water to fill the jar.

  • Now wet the wool under cold water and place one mini skein in each of the jars. Put all three jars onto your kitchen windowsill. It’s best if they get some direct sun on them during the day but it’s not a must. Wait for two days and…

  • ...take out your fibers, rinse them under cold water and hang them up to dry. Done!

I hope you will enjoy your first dyeing project :) From now on you can start experimenting with more demanding dyestuff, fibers, and dyeing techniques.


If you decide to give it a go, let me know how it went. It’s a quick and not very time-consuming exercise but it gives beautiful results and is totally worth trying. Tag me on Instagram or send me a message, I would love to see your outcome.


As always, if you have any questions, I am happy to help. I hope you will enjoy this colorful practice and find joy in little things this spring.

 

If you want to get a clear overview of the world of plant dyes,
I recently published a small ebook about all the dyeing basics.
You can find it here:


And if you are ready to start diving deep with your dyeing practice,
check out my “Mordants for natural dyes” ebook
with useful tips, recipes, and alternatives, available on Etsy.


Thank you for following along! If you are interested in behind-the-scenes of my handmade business, you can find me on Instagram. If you’d like to receive my monthly thoughts on self-employment and creativity, add your email to my Substack subscribers list.